Technical Publications Written in English

Papers Written in Portuguese

This is a list of my technical publications. Some of them are available on line!

Subjects

Dual Phase Steels

HSLA-80 and ULCB Steels

Hot Strength of Steels

Microalloyed Steels & Controlled Rolling

Development of Hot Rolling Processes

Modelling of Hot Rolling Processes and Products

Liquid Steel Refining and Casting

Batch Coil Annealing

Software and Modeling Tools

Polymers and Materials Engineering

Technical Utilities

Dual Phase Steels

GORNI, A.A.
The Effect of Finishing Temperature and Cooling Rate on the Microstructure and Mechanical Properties of an As-Hot-Rolled Dual Phase Steel
- M.Eng. Thesis, Escola Polit cnica da Universidade de São Paulo, April 1990 (in Portuguese).
- Extended Abstract in HTML File.
GORNI, A.A. & VIEIRA, R.R.
The Effect of Finishing Temperature and Cooling Rate on the Microstructure and Mechanical Properties of an As-Hot-Rolled Dual Phase Steel
- International Congress HSLA '90, Chinese Society for Metals, Beijing, November 1990.
- Extended Abstract in HTML File.
- Full Text in Adobe Acrobat (PDF) File.

Return to Publications Menu

HSLA-80 and ULCB Steels

GORNI, A.A.
Development of Alternative Alloys to Replace Quenched and Tempered Steels with Tensile Strength in the Range of 600 to 800 MPa
- Ph.D. Thesis, Mechanical Engineering Faculty of the Campinas State University, March 2001 (in Portuguese)
- Extended Abstract in HTML File.
GORNI, A.A. & MEI, P.R.
Austenite Transformation and Age Hardening of HSLA-80 and ULCB Steels
- International Conference on Advanced Materials & Processing Technologies - AMPT 2003, Belfast, July 2003.
  - Full Text in Adobe Acrobat (PDF) File.
- Journal of Materials Processing Technology, 155-156, 2004, p. 1513-1518.
  - Full Text in Adobe Acrobat (PDF) File.
GORNI, A.A. & MEI, P.R.
Development of Alternative As-rolled Alloys to Replace Quenched and Tempered Steels with Tensile Strength in the Range of 600-800 MPa
- International Conference on Advanced Materials & Processing Technologies - AMPT 2005, Gliwice-Wisla (Poland), May 2005.
  - Full Text in Adobe Acrobat (PDF) File.
- Journal of Materials Processing Technology, 162-163, 2005, p. 298-303.
  - Full Text in Adobe Acrobat (PDF) File.
GORNI, A.A. & MEI, P.R.
Effect of Controlled Rolling Parameters on the Ageing Response of an HSLA-80 Steel
- International Conference on Advanced Materials & Processing Technologies - AMPT 2006, Las Vegas, July 2006.
  - Full Text in Adobe Acrobat (PDF) File.
- Journal of Materials Processing Technology, 197, 1-3, 2008, p. 374-378.
  - Full Text in Adobe Acrobat (PDF) File.

Return to Publications Menu

Hot Strength of Steels

GORNI, A.A.
Characterization of the Hot Mechanical/Metallurgical Behavior of COSIPA Steels
- TECHCO-26 Highlights, International Iron and Steel Institute, Rio de Janeiro, 2-3 May 1994.
- Extended Abstract in HTML File.
GORNI, A.A. & CAVALCANTI, C.G.
Modeling the Effect of Alloy Elements in the Hot Strength of Steel
- International Conference on Engineering Applications of Neural Networks (EANN '97), Stockholm, June 1997.
- Full Text in HTML File.
- Full Text in Adobe Acrobat (PDF) File.
GORNI, A.A. & SILVA, M.R.S.
Metallurgically Consistent Determination of Steel Hot Strength Using Process Data from Hot Strip Mill Rolling
- 50^th Rolling Seminar - Processes, Rolled and Coated Products, Associa o Brasileira de Metalurgia, Materiais e Minera o, Ouro Preto, November 2013.
- Full Text in Adobe Acrobat (PDF) File

Return to Publications Menu

Microalloyed Steels & Controlled Rolling

SILVEIRA, J.M.S.; GORNI, A.A.; REIS, J.S.S. & CAVALCANTI, C.G.
Application of Forced Cooling during the Holding Phase in Controlled Rolling of Plates
- TECHCO-25 Highlights, International Iron and Steel Institute, Vienna, 3-4 May 1993.
- Extended Abstract in HTML File.
GORNI, A.A.; REIS, J.S.S.; SILVA, C.N.P. & CAVALCANTI, C.G.
Optimization of the Chemical Composition and Controlled Rolling Process for Shipbuilding Nb-Ti Steel Plates
- XXXII Symposium on Rolling, Brazilian Society for Metallurgy and Materials, Curitiba, November 1995 (in Portuguese).
- Extended Abstract in HTML File.
GORNI, A.A.; REIS, J.S.S.; SILVA, C.N.P.; MICHELLETTI JR., L. & CAVALCANTI, C.G.
Microstructure and Properties Characterization of Controlled Rolled, Triple Width Plates
- XXXIII Symposium on Rolling, Brazilian Society for Metallurgy and Materials, Volta Redonda, September 1996 (in Portuguese).
- Metalurgia e Materiais, November/December 1997 (in Portuguese)
- Extended Abstract in HTML File.
GORNI, A.A.; REIS, J.S.S. & SILVEIRA, J.H.D.
Recent Developments in Controlled Rolling
- Advanced Steel, 1997/1998.
- Full Text in Adobe Acrobat (PDF) File
FREITAS, F.V.; GORNI, A.A.; SILVEIRA, J.H.D.; PEREIRA, M.M.; ALVES, R.P. & SILVA, C.N.P.
Product and Hot Rolling Process Development of NV40 Steel Plates
- 9^th International Steel Rolling Conference, A.T.S., Paris, June 2006.
- Full Text in Adobe Acrobat (PDF) File
GORNI, A.A. & SILVEIRA, J.H.D.
Accelerated Cooling of Steel Plates: The Time Has Come
- Journal of ASTM International, 5:8, September 2008, 1-7.
- Full Text in Adobe Acrobat (PDF) File
GORNI, A.A. & SILVA, M.R.S.
Metallurgical Analysis of the Normalizing Rolling of Niobium Microalloyed Steels
- 50^th Rolling Seminar - Processes, Rolled and Coated Products, Associa o Brasileira de Metalurgia, Materiais e Minera o, Ouro Preto, November 2013.
- Full Text in Adobe Acrobat (PDF) File
GORNI, A.A. & SILVA, M.R.S.
Microstructural Evolution of the Normalizing Plate Rolling of Niobium Microalloyed Steels
- Tecnologia de Metalurgia, Materiais e Minera o, 12:1, January-March 2015, 72-76.
- Full Text in Adobe Acrobat (PDF) File
STALHEIM, D.G.; GUZELA, D.D.N.; GORNI, A.A.
Basic Alloy Design Concepts and Steelmaking/Casting Considerations for Optimized Hot Strip Structural Steel in Yield Strengths from 300 to 700 MPa
- 47^th International Steelmaking Seminar, a part of the ABM Week, Rio de Janeiro, September 2016.
- Full Text in Adobe Acrobat (PDF) File
STALHEIM, D.G.; BARBOSA, R.A.N.M.; BASTOS, F.M.M.M.; GORNI, A.A.; REBELLATO, M.A.
Basic Metallurgy/Processing Design Concepts for Optimized Hot Strip Structural Steel in Yield Strengths from 300 to 700 MPa
- 53^th Rolling Seminar, a part of the ABM Week, Rio de Janeiro, September 2016.
- Full Text in Adobe Acrobat (PDF) File
VIANA JR, R.T.; GORNI, A.A.; DA SILVEIRA, J.H.D.; CAMEY, K.; DE FARIA, R.J.
Study of the Mechanical Properties and Fracture Morphology Of Niobium Microalloyed 80 ksi Class Thick Plates Produced by Controlled Rolling Followed by Accelerated Cooling
- Offshore Technology Conference - Brasil, Rio de Janeiro, October 2017.
- Full Text in Adobe Acrobat (PDF) File
GORNI, A.A.; CAMEY, K.; SILVA, C.N.P.; SILVEIRA, J.H.D.
The Current Technological Frontiers of the Development of Sour Service Heavy Plates
- 55^th Rolling Seminar, a part of the ABM Week, São Paulo, October 2018.
- Slide Presentation in Adobe Acrobat (PDF) File.
GORNI, A.A.; MATSUBARA, D.B.; SILVEIRA, J.H.D.; FARIA, R.J.; VIANA JR, R.T.; BARRETO, T.L.
Influence of the Normalizing Rolling Parameters on the Toughness of a Nb, V and Ti Microalloyed Steel Processed in Gerdau Plate Mill
- 55^th Rolling Seminar, a part of the ABM Week, São Paulo, October 2018.
- Slide Presentation in Adobe Acrobat (PDF) File.
FARIA, R.; GORNI, A.; MATSUBARA, D.; VIANA JR, R.; SILVEIRA, J.H.D.; REBELLATO, M.A.
Influence of the Normalizing Rolling Parameters on the Toughness of a Nb, V and Ti Microalloyed Steel Processed in Gerdau Plate Mill
- Iron & Steel Technology Conference - AISTech 2019, Association for Iron and Steel Technology, Pittsburgh, May 2019.
- Full Text in Adobe Acrobat (PDF) File.
GORNI, A.; SILVEIRA, R.; CAMEY, K., REIS, E.
Austenite Partial Recrystallization in the Finishing Stage of Controlled Rolling of Niobium Microalloyed Steels with Low Manganese
- 11^th International Rolling Seminar, a part of the ABM Week, São Paulo, October 2019.
- Full Text in Adobe Acrobat (PDF) File.
GORNI, A.; SILVEIRA, R.; CAMEY, K.; REIS, E.
Austenite Softening in the Finishing Stage of T.M.C.P. of High Niobium-Low Manganese Microalloyed Steels
- Tecnologia de Metalurgia, Materiais e Minera o, 17:2, Abril-Junho 2020, 112-117.
- Full Text in Adobe Acrobat (PDF) File.
FARIA, R.; MATSUBARA, D.; SILVEIRA, J.H.D.; REBELLATO, M.A.; GORNI, A.; URANGA, P.
Microstructural Evolution During Normalizing Rolling of Niobium-Microalloyed Steels and Its Correlation with Toughness
- Iron & Steel Technology Conference - AISTech 2022, Association for Iron and Steel Technology, Pittsburgh, May 2022.
- Full Text in Adobe Acrobat (PDF) File.
GORNI, A.A.; REBELLATO, M.A.; SILVESTRE, L.M.
Partial Replacement of Manganese by Niobium in Low Carbon Structural Steels
- 57^th Rolling and Metal Forming Seminar, a part of the ABM Week, São Paulo, June 2022.
  - Full Text in Adobe Acrobat (PDF) File.
  - Presentation in Adobe Acrobat (PDF) File.
MARTINS, C.A.; SOUZA, A.L.; COHN, J.A.C.; FARIA, G.L.; REBELLATO, M.A.; GORNI, A.A.; URANGA, P.; RODRIGUEZ-IBABE, J.M.
Development of a 600 MPa Strength Steel by Thermomechanical Processing of a High Titanium Alloy in a Steckel Plate Mill
- 57^th Rolling and Metal Forming Seminar, a part of the ABM Week, São Paulo, June 2022.
- Full Text in Adobe Acrobat (PDF) File.
SILVEIRA, J.H.D.; MALYNOWSKYJ, A.; SILVA, C.N.P.; GORNI, A.A.; CAMEY, K.
Optimization of the Production Process from the Melt Shop to the Rolling Mill to Get Heavy Plates for Sour Service Applications
- 57^th Rolling and Metal Forming Seminar, a part of the ABM Week, São Paulo, June 2022.
- Full Text in Adobe Acrobat (PDF) File.
FARIA, R.; MATSUBARA, D.; SILVEIRA, J.H.D.; REBELLATO, M.A.; GORNI, A.; URANGA, P.
Toughness Control through Microstructural Evolution During Normalizing Rolling of Niobium Microalloyed Steels
- 57^th Rolling and Metal Forming Seminar, a part of the ABM Week, São Paulo, June 2022.
- Full Text in Adobe Acrobat (PDF) File.
GORNI, A.A.; REBELLATO, M.A.
Improvement of the Quality of Flat Structural Products through Partial Replacement of Manganese by Niobium
- 11^th International Sheet Metal Forming Conference, a part of SENAFOR, Porto Alegre, October 2022.
  - Full Text in Adobe Acrobat (PDF) File.
  - Presentation in Adobe Acrobat (PDF) File.
MARTINS, C.A.; FARIA, G.L.; MAYO, U.; ISASTI, N.; URANGA, P.; RODRIGUEZ-IBABE, J.M.; SOUZA A.L.; COHN, J.A.C.; REBELLATO, M.A.; GORNI, A.A.
Production of a Non-Stoichiometric Nb-Ti HSLA Steel by Thermomechanical Processing on a Steckel Mill
- Metals, 13:405, 2023, 19 p.
- Full Text in Adobe Acrobat (PDF) File.
ARAUJO, A.; JANSTO, S.G.; COHN, J.A.C.; FARIA, R.J.; SOUZA, A.L.; GORNI, A.; REBELLATO, M.A.
MicroNiobium-Low Manganese Steelmaking Approach at Gerdau Ouro Branco
- Iron & Steel Technology Conference - AISTech 2023, Association for Iron and Steel Technology, Detroit, May 2022, 1942-1949.
- Full Text in Adobe Acrobat (PDF) File.
COHN, J.A.C.; SOUZA, A.L.; ISASTI, N.; URANGA, P.; HADDAD, P.; REBELLATO, M.A.; GORNI, A.A.
Influence of the Holding Thickness and Process in the Microstructure and Mechanical Properties of a Microalloyed 380 MPa Structural Steel
- International Conference of Advanced Materials - Processing, Fabrication, Properties, Applications - THERMEC 2023, Technische Universit t Wien, 2023, 6 p.
- Full Text in Adobe Acrobat (PDF) File.

Return to Publications Menu

Development of Hot Rolling Processes

REIS, J.S.S.; BONILHA, F.M.; KAWAMOTO, V.T.; RANGEL, H.L.; SOUZA, A.A.; LEMELA, D. & GORNI, A.A.
Development of a New Plane View Control Technique in Plate Rolling from Continuously Cast Slabs
- TECHCO-25 Highlights, International Iron and Steel Institute, Vienna, 3-4 May 1993.
- Extended Abstract in HTML File.
GORNI, A.A.; REIS, J.S.S.; SILVEIRA, J.H.D. & CAVALCANTI, C.G.
Production of Extra-Heavy, ASTM A36 Grade Plates from Continuously Cast Slabs
- Millenium Steel, 2000, 200-203.
- Full Text in HTML File.
REIS, E.G.; GORNI, A.A.; MATSUBARA, D.B.; SILVA, E.S.; SOUSA, G.; ROBINSON, I.; SILVEIRA, J.H.D.; FRAGA, R.A. & ALVES, R.P.
Effect of Plate Surface Quality on the Effectiveness of the Accelerated Cooling Process
- 11^th International Rolling Seminar, a part of the ABM Week, São Paulo, October 2019.
- Full Text in Adobe Acrobat (PDF) File.
COSTA, A.M.; GORNI, A.A.; REIS, E.G.; SILVA, F.A.; KNEGT, F.V.; SILVA, J.H.D.; PEREIRA, M.M. & ALVES, R.P.
Development of Variable Thickness Longitudinal Profiled Rolled Plate at Gerdau Ouro Branco
- 11^th International Rolling Seminar, a part of the ABM Week, São Paulo, October 2019.
- Full Text in Adobe Acrobat (PDF) File.
COSTA, A.M.; GORNI, A.A.; REIS, E.G.; SILVA, F.A.; KNEGT, F.V.; SILVA, J.H.D.; PEREIRA, M.M. & ALVES, R.P.
Development of Tapered Plate on Gerdau Plate Mill
- Tecnologia de Metalurgia, Materiais e Minera o, 17:2, Abril-Junho 2020, 157-163.
- Full Text in Adobe Acrobat (PDF) File.
REIS, E.G.; GORNI, A.A.; MATSUBARA, D.B.; SILVA, E.S.; SOUSA, G.; ROBINSON, I.; SILVEIRA, J.H.D.; FRAGA, R.A. & ALVES, R.P.
Effect of Plate Surface Conditions on Accelerated Cooling Performance
- Tecnologia de Metalurgia, Materiais e Minera o, 17:2, Abril-Junho 2020, 178-185.
- Full Text in Adobe Acrobat (PDF) File.

Return to Publications Menu

Modelling of Hot Rolling Processes and Products

SUGAHARA, N.T.; SILVEIRA, J.H.D.; STUART, M.A.; REIS, J.S.S. & GORNI, A.A.
Development of a Mathematical Model for the Prediction of the Pass Schedule for a Plate Mill
- Steel Technology International, 1994/1995.
- Extended Abstract in HTML File.
GORNI, A.A.; REIS, J.S.S.; STUART, M.A.; SUGAHARA, N.T.; FORMICA, V.B. & SILVEIRA, J.H.D.
Mathematical Modeling of Plate Mill Processes
- TECHCO-26 Highlights, International Iron and Steel Institute, Rio de Janeiro, 2-3 May 1994.
- Extended Abstract in HTML File.
GORNI, A.A.
Application of Artificial Neural Networks in the Modeling of Plate Mill Processes
- JOM-e, 49:4, April 1997, 252-260.
- Full Text in HTML File.
- Full Text in Adobe Acrobat (PDF) File.
GORNI, A.A.
The Modelling of Hot Rolling Processes using Neural Networks: A Bibliographical Review
- Unpublished Report, August 1998.
- Full Text in HTML File.
- Full Text in Adobe Acrobat (PDF) File.
GORNI, A.A. & CAVALCANTI, C.G.
Mathematical Modelling of the Critical Temperatures of Controlled Rolling Using Empirical Equations and Neural Networks
- VII International Conference on Steel Rolling, International Iron and Steel Institute of Japan, Chiba, Japan, November 1998, 629-633.
- Full Text in HTML File.
- Full Text in Adobe Acrobat (PDF) File.
GORNI, A.A.; FORMICA, V.B. & BOGDAN, O.
Comparison Between Mathematical Modeling Approaches in Thermal Profile of Slabs During their Reheating
- Revista Escola de Minas da Universidade Federal de Ouro Preto, July-September 2000 (English Translation).
- Full Text in Adobe Acrobat (PDF) File.
GORNI, A.A.
Metallurgical Aspects of the Solubilization of Microalloying Elements During Steel Slab Reheating
- 65^th ABM Annual International Congress, Rio de Janeiro, July 2010.
- Slide Presentation in Adobe Acrobat (PDF) File.
GORNI, A.A. & SILVA, M.R.S.
Characterization of the Friction Conditions in the Finishing Stands of a Hot Strip Mill
- 1^st International Brazilian Conference on Tribology - TriboBR-2010, ABM, Rio de Janeiro, 2010, 11 p.
- Full Text in Adobe Acrobat (PDF) File.
GORNI, A.A. & SILVA, M.R.S.
Characterization of the Friction Conditions in the Finishing Stands of a Hot Strip Mill
- Tecnologia em Metalurgia, Materiais e Minera o, 9:2, Abril-Junho 2012, 103-108.
- Full Text in Adobe Acrobat (PDF) File.
GORNI, A.A., REBELLATO, M.A., NAGARAJAN, V. & BARBOSA, R.A.N.M.
Modelling the Microstructural Evolution During Hot Strip Rolling of Niobium Microalloyed Steels
- 4^th International Conference on Thermomechanical Simulation - SimPro 2016, Ranchi (India), February 2016, 186-195.
- Full Text in Adobe Acrobat (PDF) File.
OLIVEIRA, P.O.; GORNI, A.A.; REBELLATO, M.A.
Artificial Intelligence for Metallurgical Properties Prediction of Steel Rolled Products: A Review
- 57^th Rolling and Metal Forming Seminar, a part of the ABM Week, São Paulo, June 2022.
- Full Text in Adobe Acrobat (PDF) File.
GORNI, A.A.; REBELLATO, M.A.; GUZELA, D.D.N.
Tools for the Development of Alloy Designs for Hot Rolled Flat Steel Products
- 11^th International Sheet Metal Forming Conference, a part of SENAFOR, Porto Alegre, October 2022.
  - Full Text in Adobe Acrobat (PDF) File.
  - Presentation in Adobe Acrobat (PDF) File.
PEREDA, B.; LOPEZ, B.; SOUZA, A.L.; MOURAO, G.M.M.; REBELLATO, M.A.; GORNI, A.A.
MicroSim - Phase Transformation: An Austenite Transformation Model for Low Alloy Steels
- 58^th Rolling, Metal Forming and Products Seminar, a part of the ABM Week, São Paulo, August 2023, 8 p.
  - Full Text in Adobe Acrobat (PDF) File.

Return to Publications Menu

Liquid Steel Refining and Casting

GUZELA, D.D.N.; BASTOS, F.M.M.M.; NOGUEIRA, M.A.S.; GORNI, A.A.; REBELLATO, M.A.
MacroSim, a Tool for Fast Diagnosis of the Continuous Casting Process of Slabs
- 51^thMelting, Refining & Casting Seminar, a part of the ABM Week, São Paulo, June 2022.
- Full Text in Adobe Acrobat (PDF) File.
GUZELA, D.D.N.; NOGUEIRA, M.A.S.; GORNI, A.A.; REBELLATO, M.A.
Benefits for LD Steel Plant Resulting from the Partial Substitution of Manganese by Small Additions of Niobium
- 51^thMelting, Refining & Casting Seminar, a part of the ABM Week, São Paulo, June 2022.
- Full Text in Adobe Acrobat (PDF) File.
GUZELA, D.D.N.; HADDAD, P.; GORNI, A.A.; CASTA EDA, R.S., RAMOS, I.C.
Benefits for BOF/EAF Steel Plant Resulting from the Partial Substitution of Manganese by Small Additions of Niobium
- Congreso y Exposici n de la Industria del Acero - CONAC 2023, AIST-M xico, Monterrey, 2023.
- Full Text in Adobe Acrobat (PDF) File.
DE MELO, G.M.; COSTA, A.M.; NASCIMENTO, A.A.; OLIVEIRA, A.P.; GORNI, A.A.; OLIVEIRA, G.L.P.O., IBABE, J.M.
Solidification Microstructure of a Continuously Cast HSLA Steel slab with U-shape Centerline Segregation
- 6th European Steel Technology and Application Days - ESTAD 2019, VDEh, Düsseldorf, 2023, 8 p.
- Full Text in Adobe Acrobat (PDF) File.
DE MELO, G.M.; COSTA, A.M.; NASCIMENTO, A.A.; OLIVEIRA, A.P.; GORNI, A.A.; OLIVEIRA, G.L.P.O., IBABE, J.M.
Macro and Microsegregation Assessment Method for Continuous Casting of Wide Slabs
- 52° Steelmaking, Foundry and Non-Ferrous Metallurgy Seminar, a part of ABM Week, São Paulo, 2023, 12 p.
- Full Text in Adobe Acrobat (PDF) File.
OLIVEIRA, A.P.; GORNI, A.A.; DE MELO, G.M.; REBELLATO, M.A.
CON1D: Comparison of Microsegregation Models for Weathering Steel (ASTM A588)
- Continuous Casting Center Annual Meeting, Colorado School of Mines, Golden, 2023, 45 p.>
- Full Text in Adobe Acrobat (PDF) File.
DE MELO, G.M.; COSTA, A.M.; NASCIMENTO, A.A.; OLIVEIRA, A.P.; GORNI, A.A.; OLIVEIRA, G.L.P.O., IBABE, J.M.
Macro and Micro Segregation Assessment Method for Continuous Casting Wide Slabs
- Continuous Casting Center Annual Meeting, Colorado School of Mines, Golden, 2023, 18 p.>
- Full Text in Adobe Acrobat (PDF) File.

Return to Publications Menu

Batch Coil Annealing

BRANCHINI, O.L.G.; GORNI, A.A. & TSCHIPTSCHIN, A.P.
Determination of the Microstructural Evolution during the Batch Annealing of Microalloyed Steel Coils
- International Congress HSLA '90, Chinese Society for Metals, Beijing, November 1990.
- Extended Abstract in HTML File.
- Extended Abstract in Adobe Acrobat (PDF) File.
- Full Paper in Adobe Acrobat (PDF) File.

Return to Publications Menu

Software and Modeling Tools

GORNI, A.A.
Artificial Neural Networks: A Revolutionary Approach in Artificial Intelligence (Parts I & II)
- Micro Sistemas, November 1993 and December 1993 (in Portuguese).
- Extended Abstract in HTML File.

Return to Publications Menu

Polymers and Materials Engineering

GORNI, A.A.
Spreadsheet Applications in Materials Science
Chapter of the book Spreadsheets in Science and Engineering, edited by W.G. Filby and published by Springer Verlag in January 1998.
- Extended Abstract in HTML File.
- @ Springer-Verlag.
Contributor of the Comprehensive Dictionary of Electrical Engineering, edited by Phillip A. Laplante and published by C.R.C. Press and I.E.E.E. Press in January 1999.

Return to Publications Menu

Technical Utilities

GORNI, A.A.
Steel Forming and Heat Treating Handbook
- Work in Progress since April 2002. Last version: 13 December 2019.
- Full Text in Adobe Acrobat (PDF) File.

Return to Publications Menu

Return to the Main Menu.

	Last Update: 10 September 2023
	© Antonio Augusto Gorni